Products

IDEM

CPi are the Distributor for IDEM safety switches . Conveyor safety being at the top of our importance list,we have a full range of short to long distance Rope Pulls. These Include
Short range . 1m-30meters
Medium range. 30m-60m
Long range. 60m – 250m
Included in our Complete Conveyor solution are all the accessories to suite all aplications. Springs , Tension Grippers , Cable and Turnbuckles to name a few.

Belt Alignment Switch

Model TA

What the switch does:
• The model TA Conveyor Belt alignment Switch protects the conveyor belt from damage due to belt misalignment or runoff.
• Each switch consists of an aluminium housing with a red epoxy coated roller.
• The model TA can be furnished with general purpose or explosion proof construction. Cast Iron and epoxy coated housings are also available.

Belt Rip and Tear Switch

Model DB

What the switch does:
• An early warning system for damaged belts
• Economical and easy to install, they warn supervisory personnel of impending belt failures due to rips, punctures, splice failures, or sharp objects protruding through the belt fabric.
• A belt problem is detected when an object or a piece of damaged belt hangs below the belt’s surface and sweeps away cables.
• As the cable is detached it pulls the spring loaded ball out of a socket, causing two micro switches to sound an alarm or to shut down the conveyor.
• The model DB can be furnished with general purpose or explosion proof construction. Cast Iron and epoxy coated housings are also available.

Tilt Level Switch

Model CT

What the switch does:
• The Model CT tilt level control is designed for use in applications where the bulk material to be sensed is exposed or open.
• These level controls are used in the Process Industry on bulk materials that require rugged sensors
• The Model CT can be furnished in stainless steel or mild steel and 6” (Compact), 9” (Standard) sizes.

Head End Control Unit

• The Head end control unit is the interface between the PLC and the conveyor safety and control system. Can be supplied with Profibus, Profinet, Ethernet IP, Devicenet Interfaces.
• It has a touch screen to show locally which safety device has been activated and diagnostic information on the intelligent system.
• If required the control of the conveyor can reside within the head end control unit. PLC functionality is standard.
• Configuration of intelligent network is easily done via screen no pc required.
• Category 4 Safety Rating.

Intelligent Pull Switch Station

• Intelligent pull switch system, a card is integrated into each pullswitch.
• Pull switches trip on both pull and slack rope.
• Single 2 wire used for power and communications.
• LED for local indication of tripped switch..
• Pre start warning audible and visual.
• All manufactured and delivered in kit form.
• Category Safety rating.

Conventional Process I/O on and around Conveyor

• Same network used for safety and normal I/O.
• Various types of digital I/O – transistor, relay, pneumatic, LED.
• Analogue I/O for Bin Levels, bearing temperatures, scales
• Power and data on the same 2 wires.